Counteract 6OZ-B4 Centrifugal Force Tire/Wheel Balancing Beads - Off-Road Vehicles, Light Duty Truck Tires, (4) 6oz Balance Bead Bags, (4) Valve Caps and Cores

Worked in my SRW. Even at higher speeds

They work pretty good. One bag, the bead bag was open, but still usable. Dont use the supplied Schrader valves if you are installing them into tires with toms sensors as the valves will stick open and leak all the air out as the plastic end will catch down inside the stem. Otherwise they are fine

Awesome product. However every bag is always broken open making product a pain to use. Need better way to ship

I have the "chevy shake" on my truck, it might be made worse by a tire problem, it also might be due to the natural resonance of the suspension. I balanced one wheel several times, and increased the speed before the shake up past 60mph, but never fixed it.These beads fixed the shake. They are not a "cure all," nor is the fix instant.As you go up in speed past 60mph, the tire will start bouncing, but over the period of 30 or 40 seconds, the bounce will reduce, depending upon road conditions.I found speeding up past the mph I wish to drive (while experiencing a decent amount of bounce) for a few seconds and then dropping the mph back to my desired speed will give me the best results for a smooth ride much faster.If you more or less stop worrying about the bounce, you will find it is working well enough for your attention to be off the bounce, and the ride turns out to be very acceptable.

I have only had these in the tires for a fee days so far but I am very pleased on how they perform

Nice

I used the valve cores that came with this and it got stuck inside the valve stem not allowing air to pass through. I had to drill them out and use different cores to get my truck back on the road.I also noticed that it's inconsistent balance while driving. Not exactly sure why as this is my first time using balance beeds.

They claim toss in bag. 🤣 The only bag in the bag is for the core and stem cap. Which EVERYONE of them were torn and I have to fish them out of the beads. I ended up putting the beads in saran wrap and burn it sealed. This way there was a bag. Can’t tell you how good they work yet, but it is not as advertised. Very disappointed and just created more work for me. The special valve cores SUCK. About 25% of the time when checking the pressure the core gets stuck open. I’m going to throw them all away and put the regular cores back in. Not really sure why these are rated so high at all. Makes me question other ratings now.